CL515 Tubular Mortice Latch With Code Free Entry Option

Heavy duty push button tubular mortice latch with code free entry option

Select your product

Price

	CL515 Tubular Mortice, Code Free, Polished… - Out of stock	$223.50
	CL515 Tubular Mortice, Code Free, Stainless Steel	$223.50

Options

500 Series Handle Type

Latch Sizes

Quantity:

The prices displayed exclude tax.

Description
Specification
How to fit
How to program
Spares

Heavy duty tubular Mortice latch with Code Free entry option.

The outside lever handle will retract the latch after a correct code is entered. The spring loaded latchbolt will lock automatically when the door is closed.

Code Free access option on the keypad.

In Code Free mode the outside lever will retract the latchbolt without using a code. This option is ideal for day to day use when punching in a code is not necessary e.g. external doors in a school with high traffic.

Internal doors and External doors
Mechanical Codelock
Heavy duty tubular Mortice latch
Code Free access option
Lever handle lock for doors hung on the left or right
Available in Stainless Steel and Polished Brass
Use in offices / schools / warehouses / hospitals / care homes / nurseries / hotels / leisure facilities / the home
Back to Back option available – CL515BB

Available in two PVD Finish
Stainless Steel, Polished Brass

Codelocks CL515 Mechanical Lock PVD Finishes

CL515 stainless steel lock available with either lever or knob handle.

The CL515 locks are supplied with a random code commencing with the ‘C’ clear button. To change the code after fitting, the lock must first be removed from the door. The code is non sequential, that is the code can be entered in any order e.g. 1234 can be 4321 or 1342 or whatever is the most convenient sequence. With the 10 buttons a total of 1,023 different codes are available, any of which may be entered in any order.

Item	Details
Body material	Zinc alloy
Door material	Suitable for wooden doors
Door thickness	35mm - 65mm (1 3/8" - 2 1/2")
Finishes	PVD (Physical Vapour Deposition) hardwearing low maintenance finish SS (stainless steel) and PB (polished brass)
Latches - Option 1	60mm (2 3/8") backset latch requiring 25 x 82mm (1" x 3 1/4") hole (supplied by default)
Latches - Option 2	70mm (2 3/4") backset latch requiring 25 x 92 mm (1"x 3 5/16") hole
Non handed	Lock will fit doors hung on the left or right
Spindle type	2 part 5/16" (inches) spring loaded spindle

Print this page

Downloads:

Cl515 installation template

Number relating to picture	Item	CL515
1	Front Plate and handle	*
2	Back Plate and handle	*
3	Neoprene seals x 2	*
4	Spindles : a) RED and BLUE tipped spindles b) Butterfly spindle	* *
5	Fixing bolts x 2 (1 x spare)	*
6	Spare code tumblers x 2	*
7	Tweezers for code changing	*
8	Allen keys x 2	*
9	Mortice latch, strike & 4 screws	*
10	Latch support post	*

Tools Required

Power Drill
Drill bit 25mm and 12mm
Philips screwdriver
Hammer / mallet
Chisel 25mm
Stanley knife
Adhesive tape, pencil, bradawl, tape measure

Check operation of the coded front plate

Note the slotted turn within the bottom left hand button. If the slot is in the vertical position it signifies that a code is needed each time to operate the lever handle.

Enter the code from the code card provided in the box, the lever handle should turn fully to 80 degrees, and then spring back to horizontal.
Enter the code again, turn the slot to the horizontal position and the lock will be in code-free access mode.

Return the slot to the vertical position and after one further free turn of the handle the lock will be in code control mode again.

Turn the front plate over and note that the red tipped tumblers inside correspond to the code.

The code may be entered in any sequence, i.e. 1370 may be entered as 3710 or any other sequence of those numbers. There are a total of 1,023 codes available, any of which may be entered in any order.

If you intend to change the code you should do it, if convenient, before installing the lock – see the Code Change instructions.

The CL515 model has a tubular, deadlocking, mortise latch and may be used as a new installation on a door, or where an existing latch is to be replaced.

1. Lightly mark a height line on the edge and both faces of the door, and on the door jamb, to indicate the top of the lock when fitted. Crease the template along the dotted line, and tape it to the door with the top in line with the height line. Mark the 2 x 12mm and the 1 x 30mm holes. Mark the centre of the door edge on the Centre Line of Latch. Remove the template and apply it to the other side of the door, aligning it accurately with the first Centre Line of Latch mark. Mark the 4 holes again.

2. Keeping the drill level and square to the door, drill a 35mm hole to accept the latch.

3. Keeping the drill level and square to the door, drill the 12mm and 30mm holes from both sides of the door to increase accuracy and to avoid splintering out the door face

Codelocks CL515 Lock Installation Diagram

4. Put the latch into the hole and, holding it square to the door edge, draw around the faceplate. Remove the latch and score the outline with a Stanley knife to avoid splitting and chiselling, chisel a rebate to allow the latch to fit flush to the surface.

5. Fix the latch with the wood screws, with the bevel towards the door frame.

6. Fitting the strike plate. N.B. The plunger beside the latchbolt deadlocks it, to protect against manipulation or ‘shimmering’. The strike plate must be accurately installed so that the plunger CANNOT enter the aperture when the door is closed, even if it is slammed shut. Position the strike plate on the door frame so that it lines up with the flat of the latchbolt and NOT the plunger. Mark the positions of the fixing screws, and draw around the aperture of the strike plate. Chisel out the aperture 15mm deep to receive the latchbolt. Fix the strike plate to the surface of the frame using only the top fixing screw. Gently close the door and check that the latchbolt enters the aperture easily, and is held without too much ‘play’. When satisfied, draw around the outline of the strike plate, remove it and cut a rebate to enable the faceplate to lie flush with the surface. Re-fix the strike plate using both screws.

7. Check that the lever handles are correctly fitted for the hand of door. To change the hand of a lever handle, loosed the grub screw with the small Allen key, reverse the lever handle and fully tighten the grub screw.

8. Take the BLUE and RED tipped spindle and fit to the code side according to the hand of your door (see diagram).

Fit the butterfly spindle to the inside, non-code side.

Codelocks CL515 Lock Installation Diagram

Codelocks CL515 Lock Installation Diagram

9. Fit latch support post into back of the code side front plate according to the hand of your door, A for a right hand door, or B for a left hand door (see diagram).

10. Cut two of the black socket head bolts to the required length for your door. Approximate overall length should be door thickness plus 25mm to allow about 10mm of threaded bolt to enter the outside plate.

11. Apply the front and back plates, with the neoprene seals in position, against the door, over the protruding ends of the spindle.

12. Fix the two plates together using the socket head bolts, starting with the top fixing. Ensure that the two plates are truly vertical and then tighten the bolts using the ‘T’ shaped Allen key. Do not use excessive force.

13. Before closing the door, enter the code and ensure that the latchbolt will retract when the lever handle is depressed. Now check the operation of the inside lever handle. If there is any binding of the handles or latch then loosen the bolts slightly and reposition the plates slightly until the correct position is found, and then re-tighten the bolts.

Print this page

The CL515 code chamber consist of 10 buttons from which the code is selected, and a ‘C’ button which is used to re-set the chamber after an incorrect entry, and which must always be used as the first digit of a code. Buttons may only be used once in a code. For example, 1212 is not possible.

A CL515 code, or combination, can be entered in any order or sequence; e.g. 1234 can be 4321 or 1342 or whatever sequence is most convenient to remember. With 10 buttons, a total of 1,023 different codes are available, any of which can be entered in any sequence.

The lock is factory set with a randomly selected 5 digit code starting with the C button. The code is not recorded by the factory. The code can be changed as often as required to any other 5 digit code. Every new code must start with the C button. Using the spare tumblers, one red and one blue, the code length can be changed to 4 or 6 digits. Shorter codes are possible, but 1 or 2 digit codes are not recommended.

Code Change Instructions

Note: Before changing the code make sure that the lock is in Code Control Mode, with the slot in the bottom left button in the vertical position.

1. Take your CL515 lock off the door by unscrewing the 2 bolts in the backplate.

2. Press the C button to reset the chamber and place the lock case on a flat surface with the buttons down.

3. Remove the 4 red screws and carefully lift off the code chamber plate. Check the all 12 springs are held in place on the plate.

4. Note that the red tipped code tumblers correspond in position to the existing code. The blue tipped non-code tumblers fill the other positions. The C tumbler is not colored.

5. Hold the lock in your hand and depress the C button. Keeping the C button depressed use tweezers to re-position the tumblers to correspond with your new code. The square notches of ALL tumblers MUST face outwards, with the colored tips ON TOP: see diagram below. Do not force the tumblers in.

N.B. Holding the C button depressed whilst removing or replacing the tumblers is essential to avoid damaging the internal mechanism. Do not attempt to reposition the C tumbler.

6. Replace the code chamber plate carefully with the 4 red screws.

7. Check the operation of the new code, and make a written note of it before re-installing the lock.

8. Note: Fit either the Blue or Red tipped spindle to the code side, dependant on hand of door.

9. Fit the butterfly spindle to the inside lever handle.

Maintenance

No maintenance of the working parts is necessary. Do not oil. To maintain the finish the lock should be cleaned regularly with a soft cloth. A silicone spray or similar should be used to provide a protective film against grit and grime.

	Description	Price
	Ball Knob for CL500 Series
	CL500 Lever Return Spring	Free
	CL500 Replacement Fixing Bolt	Free
	CL500 Replacement Latches	From $31.50
	Lever Handle for CL500	From $20.00
	Mechanical Spares Kit	From $186.00
	Stubby Lever for CL0460 and CL500 Series	From $20.00